There isn’t a higher option to elevate your lounge than by elevating that huge TV from a stand and onto a wall. Wall-mounting a TV could seem daunting, but when your house permits it you’ll be able to reclaim treasured actual property in your leisure heart and assist your residing space really feel extra open and ethereal. It’ll additionally take pleasure in protecting your treasured TV out of attain from meddlesome youngsters or rambunctious pets
All it takes are some primary instruments, a little bit of labor, and a buddy to assist elevate bigger TVs. Right here’s all it’s worthwhile to put together your self.
TV wall mounts are a commodity merchandise lately, so there are every kind of comparable wanting fashions from every kind of manufacturers. Amazon is awash with choices and even Amazon Basics sells some.
The primary stuff you need to search for are what dimension of TV a mount is rated for, and the way a lot weight it will possibly maintain. Test the tech specs of your actual TV mannequin, and be sure you’re nicely inside the mount’s vary.
You must also double-check the VESA sizing of your TV, and make sure the wall mount is appropriate. VESA mount sizes correspond to the space between the bolt connector holes on the rear of your TV.
One other essential factor to contemplate is that if the wall mount is fastened, merely tilts, or has full-motion articulation, permitting it to come back off the wall. Mounted and primary tilt fashions could also be less complicated and a little bit sturdier, however I can not stress sufficient how handy it’s to have the ability to pull the TV away from the wall on a tilt arm. It makes unplugging and plugging in any cables to the again of the TV a lot simpler. Once I had a primary tilt mount for my outdated 70-inch TV, merely adjusting HDMI plugs within the again may very well be a two-person job, as a result of we needed to elevate the TV off the wall with a purpose to attain the ports.
Once I lately mounted a new 77-inch LG C3 OLED TV, I went with this articulating model by USX. Its claimed score — for TVs as much as 86 inches and weighing 132 kilos — was greater than sufficient to cowl my TV, which weighs lower than half of that at 51.8 kilos. I wasn’t accustomed to USX earlier than shopping for it, however I took an opportunity and it’s been completely effective. I’ve additionally had constructive experiences with mounts and equipment from Mount-It.
You’ll usually want a drill, screwdriver, bubble degree, stud finder, and a pencil. The wall mount might include a primary screwdriver, hex key, or small wrenches — perhaps even a small bubble degree.
Wall mounts often have two vertical bars that connect to the TV through its VESA screw holes, permitting the TV to hold on the bracket as soon as it’s mounted. These bars often have many mounting holes, to accommodate completely different sizes of TVs. Lay your TV down on a flat, padded floor and mount the bars to its again based on the included directions.
Measure, measure, measure
Most wall mounts include a paper template that exhibits the footprint of the mounting bracket. You’ll want to make use of this or the bracket itself to border up the place it can go. To pick the perfect location to mount it in your wall, you’ll need to account for the scale of your TV and the way excessive or low it will possibly match in your wall. Remember the fact that you need your TV to be about eye degree, although not each house can simply accommodate the perfect peak. You’ll want to really sit down the place you’ll be watching from and visualize the place your TV ought to go, and check out to not pull any r/TVTooHigh crimes.
Discover the scale of the TV from its tech specs and use them to measure its ultimate mounting location on the wall. You’ll then need to measure the space between the highest of the TV to the place the vertical bars will hold on the bracket. That will provide you with an concept of how excessive you’ll need to mount the bracket on the wall. Mark that peak in your wall with a pencil.
Now that you’ve an concept of the place the bracket will go, seize the stud finder and map out your wall studs. Securing the bracket to a sturdy wall stud is crucial when mounting heavy stuff, as drywall alone isn’t robust sufficient to soundly carry such a load. The bracket’s horizontal location on the wall has a little bit leeway, because the TV doesn’t have to hold on the precise heart of the bracket. You’ll hopefully have a wall stud that aligns with one of many bracket’s screw holes — if not, I’ll clarify cope with that within the subsequent part. Use the bubble degree to degree the bracket or its template on the wall the place it ought to go, and mark the screw holes on the wall.
To mount the bracket to your mapped-out spot on the wall, you’ll need to drill some pilot holes for the screws. The directions ought to inform you how huge the pilot holes must be. The difficult half is what to do if one aspect of screws don’t line up with a stud.
You’ll need to use wall anchors or toggle bolts for any screws not going into studs, as a result of mounting a TV to only Sheetrock might seemingly trigger it to tear out of the wall and fall. To make sure my brackets might safely maintain the load of my TV, regardless of not lining up with wall studs, I’ve used Toggler toggle bolts. (There are many different manufacturers too, and you’ll simply discover them at {hardware} shops.) The sizes of the toggle bolts or anchors you’ll want to make use of rely upon the screws included along with your bracket.
A fast apart: toggle bolts are incredible, and I’ve used them to hold issues like my TV’s soundbar and numerous cabinets round my home that didn’t line up with wall studs. Simply bear in mind they require drilling a bigger-than-average pilot gap, so be certain you get your measurements spot-on.
Now drill your pilot holes, put in any needed anchors or toggle bolts, and screw the bracket to the wall.
That is really the simplest half, offered you’ve gotten a pal that will help you. However it’s additionally one of the vital demanding. Staff-lift the TV up and onto the bracket. When you hold it there’s often a small screw or related methodology to lock the underside of the vertical TV bars to the underside of the bracket. This additional little bit of safety is important, as a result of with out it your TV is simply hanging on by gravity and never totally secured. If the TV is just too excessive or too low on the bracket, you must be capable to take it off and modify the vertical bars on its rear to get it within the good spot.
Should you opted for a tilting or articulating mount, that is if you’ll need to tinker with it as per the included directions to make sure the TV is degree. Additionally, in case your TV is very huge or mounted barely above eye degree, you’ll be able to tilt it downwards barely towards you.
Now get pleasure from that beautiful TV in your wall.
Yet one more factor: cable administration
Okay, I do know you’re finished and all pleased with your self (try to be), however there’s a further step you must take into account to make a wall-mounted TV setup look its finest: neaten up your cables.
There are a number of how you are able to do this. For instance, you should use cable hiders or raceways, or lower entry and exit holes within the wall behind your TV and set up a cable bridge to cover the cables fully (you’ll want some prolonged cables). Whether or not you go for one thing easy or superior, any cable administration is healthier than simply letting wires dangle and fall wherever they might. You’ve labored this difficult to mount your TV, so why not go the additional mile and make the house look tidier?